Review



plot of the simulated deflection  (COMSOL Inc)

 
  • Logo
  • About
  • News
  • Press Release
  • Team
  • Advisors
  • Partners
  • Contact
  • Bioz Stars
  • Bioz vStars
    • 90
      Buy from Supplier

    Structured Review

    COMSOL Inc plot of the simulated deflection
    Finite element modeling of the <t>deflection</t> of the SiMIPA microporous membrane under fluid flow. (a) Rendering from COMSOL showing the deflection of a membrane with 20 μm holes under a 2000 μL/sec flow rate. (b) A plot of the simulated deflection of a 3 × 3 × 0.05 mm3 Si membrane under different flow rates while the 3 × 0.05 mm2 faces are fixed. The membrane has a hexagonal lattice of pores through the 0.05 mm thick membrane where the center-to-center spacing is equal 30 μm. The linear regression line intercepts at y = 0 and has R2 = 0.9925. (c) Rendering from COMSOL showing the von Mises stress on a membrane with 20 μm holes under a 2000 μL/sec flow rate. (d) A plot of the simulated maximum von Mises stress observed on a 3 × 3 × 0.05 mm3 membrane under different flow rates while the 3 × 0.05 mm2 faces are fixed. The membrane has a hexagonal lattice of pores through the 0.05 mm thick membrane where the center-to-center spacing is 30 μm. The linear regression line intercepts at y = 0 and has R2 = 0.9925.
    Plot Of The Simulated Deflection, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/result/plot of the simulated deflection/product/COMSOL Inc
    Average 90 stars, based on 1 article reviews
    plot of the simulated deflection - by Bioz Stars, 2026-04
    90/100 stars

    Images

    1) Product Images from "Mass-Producible Microporous Silicon Membranes for Specific Leukocyte Subset Isolation, Immunophenotyping, and Personalized Immunomodulatory Drug Screening In Vitro"

    Article Title: Mass-Producible Microporous Silicon Membranes for Specific Leukocyte Subset Isolation, Immunophenotyping, and Personalized Immunomodulatory Drug Screening In Vitro

    Journal: Lab on a chip

    doi: 10.1039/c9lc00315k

    Finite element modeling of the deflection of the SiMIPA microporous membrane under fluid flow. (a) Rendering from COMSOL showing the deflection of a membrane with 20 μm holes under a 2000 μL/sec flow rate. (b) A plot of the simulated deflection of a 3 × 3 × 0.05 mm3 Si membrane under different flow rates while the 3 × 0.05 mm2 faces are fixed. The membrane has a hexagonal lattice of pores through the 0.05 mm thick membrane where the center-to-center spacing is equal 30 μm. The linear regression line intercepts at y = 0 and has R2 = 0.9925. (c) Rendering from COMSOL showing the von Mises stress on a membrane with 20 μm holes under a 2000 μL/sec flow rate. (d) A plot of the simulated maximum von Mises stress observed on a 3 × 3 × 0.05 mm3 membrane under different flow rates while the 3 × 0.05 mm2 faces are fixed. The membrane has a hexagonal lattice of pores through the 0.05 mm thick membrane where the center-to-center spacing is 30 μm. The linear regression line intercepts at y = 0 and has R2 = 0.9925.
    Figure Legend Snippet: Finite element modeling of the deflection of the SiMIPA microporous membrane under fluid flow. (a) Rendering from COMSOL showing the deflection of a membrane with 20 μm holes under a 2000 μL/sec flow rate. (b) A plot of the simulated deflection of a 3 × 3 × 0.05 mm3 Si membrane under different flow rates while the 3 × 0.05 mm2 faces are fixed. The membrane has a hexagonal lattice of pores through the 0.05 mm thick membrane where the center-to-center spacing is equal 30 μm. The linear regression line intercepts at y = 0 and has R2 = 0.9925. (c) Rendering from COMSOL showing the von Mises stress on a membrane with 20 μm holes under a 2000 μL/sec flow rate. (d) A plot of the simulated maximum von Mises stress observed on a 3 × 3 × 0.05 mm3 membrane under different flow rates while the 3 × 0.05 mm2 faces are fixed. The membrane has a hexagonal lattice of pores through the 0.05 mm thick membrane where the center-to-center spacing is 30 μm. The linear regression line intercepts at y = 0 and has R2 = 0.9925.

    Techniques Used: Membrane



    Similar Products

    plot of the simulated deflection  (COMSOL Inc)
    90
    COMSOL Inc plot of the simulated deflection
    Finite element modeling of the <t>deflection</t> of the SiMIPA microporous membrane under fluid flow. (a) Rendering from COMSOL showing the deflection of a membrane with 20 μm holes under a 2000 μL/sec flow rate. (b) A plot of the simulated deflection of a 3 × 3 × 0.05 mm3 Si membrane under different flow rates while the 3 × 0.05 mm2 faces are fixed. The membrane has a hexagonal lattice of pores through the 0.05 mm thick membrane where the center-to-center spacing is equal 30 μm. The linear regression line intercepts at y = 0 and has R2 = 0.9925. (c) Rendering from COMSOL showing the von Mises stress on a membrane with 20 μm holes under a 2000 μL/sec flow rate. (d) A plot of the simulated maximum von Mises stress observed on a 3 × 3 × 0.05 mm3 membrane under different flow rates while the 3 × 0.05 mm2 faces are fixed. The membrane has a hexagonal lattice of pores through the 0.05 mm thick membrane where the center-to-center spacing is 30 μm. The linear regression line intercepts at y = 0 and has R2 = 0.9925.
    Plot Of The Simulated Deflection, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/result/plot of the simulated deflection/product/COMSOL Inc
    Average 90 stars, based on 1 article reviews
    plot of the simulated deflection - by Bioz Stars, 2026-04
    90/100 stars
    		  Buy from Supplier

    Image Search Results


    Finite element modeling of the deflection of the SiMIPA microporous membrane under fluid flow. (a) Rendering from COMSOL showing the deflection of a membrane with 20 μm holes under a 2000 μL/sec flow rate. (b) A plot of the simulated deflection of a 3 × 3 × 0.05 mm3 Si membrane under different flow rates while the 3 × 0.05 mm2 faces are fixed. The membrane has a hexagonal lattice of pores through the 0.05 mm thick membrane where the center-to-center spacing is equal 30 μm. The linear regression line intercepts at y = 0 and has R2 = 0.9925. (c) Rendering from COMSOL showing the von Mises stress on a membrane with 20 μm holes under a 2000 μL/sec flow rate. (d) A plot of the simulated maximum von Mises stress observed on a 3 × 3 × 0.05 mm3 membrane under different flow rates while the 3 × 0.05 mm2 faces are fixed. The membrane has a hexagonal lattice of pores through the 0.05 mm thick membrane where the center-to-center spacing is 30 μm. The linear regression line intercepts at y = 0 and has R2 = 0.9925.

    Journal: Lab on a chip

    Article Title: Mass-Producible Microporous Silicon Membranes for Specific Leukocyte Subset Isolation, Immunophenotyping, and Personalized Immunomodulatory Drug Screening In Vitro

    doi: 10.1039/c9lc00315k

    Figure Lengend Snippet: Finite element modeling of the deflection of the SiMIPA microporous membrane under fluid flow. (a) Rendering from COMSOL showing the deflection of a membrane with 20 μm holes under a 2000 μL/sec flow rate. (b) A plot of the simulated deflection of a 3 × 3 × 0.05 mm3 Si membrane under different flow rates while the 3 × 0.05 mm2 faces are fixed. The membrane has a hexagonal lattice of pores through the 0.05 mm thick membrane where the center-to-center spacing is equal 30 μm. The linear regression line intercepts at y = 0 and has R2 = 0.9925. (c) Rendering from COMSOL showing the von Mises stress on a membrane with 20 μm holes under a 2000 μL/sec flow rate. (d) A plot of the simulated maximum von Mises stress observed on a 3 × 3 × 0.05 mm3 membrane under different flow rates while the 3 × 0.05 mm2 faces are fixed. The membrane has a hexagonal lattice of pores through the 0.05 mm thick membrane where the center-to-center spacing is 30 μm. The linear regression line intercepts at y = 0 and has R2 = 0.9925.

    Article Snippet: The deflection profile of the entire membrane was reconstructed using the mirroring feature in COMSOL. fig ft0 fig mode=article f1 fig/graphic|fig/alternatives/graphic mode="anchored" m1 Open in a separate window Fig. 3. caption a7 Finite element modeling of the deflection of the SiMIPA microporous membrane under fluid flow. (a) Rendering from COMSOL showing the deflection of a membrane with 20 μm holes under a 2000 μL/sec flow rate. (b) A plot of the simulated deflection of a 3 × 3 × 0.05 mm 3 Si membrane under different flow rates while the 3 × 0.05 mm 2 faces are fixed.

    Techniques: Membrane